Hi-Force Single, Portable Low Height Hydraulic Cylinder, HVL10, 10T, 6mm stroke

  • RS Stock No. 200-8775
  • Mfr. Part No. HVL10
  • Brand Hi-Force
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Very Low Height Cylinders

Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areas
All cylinders have a 6mm stroke and are manufactured to the same high standards as our existing range of cylinders

//media.rs-online.com/t_line/L200877-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifications
Attribute Value
Manufacturer Series HVL
Single/Double Acting Single
Capacity 10t
Stroke 6mm
Closed Height 28mm
Extended Height 34mm
Cylinder Effective Area 14.4cm²
Oil Capacity 9cm³
Outside Diameter 87mm
Maximum Operating Pressure 700 bar
Weight 1.6kg
3 In stock for delivery within 1 working days
Price Each
kr 3 245,62
(exc. VAT)
kr 4 057,02
(inc. VAT)
Units
Per unit
1 +
kr 3 245,62
Related Products
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel body. Recommended hydraulic medium: Mineral oil based fluidsNBR ...
The through-bore piston design offers the user flexibility ...
Description:
The through-bore piston design offers the user flexibility when selecting equipment to provide a pulling force. This range of cylinders can also be used in the pushing mode. The replacement saddle is threaded to screw into the threaded counter-bore of ...
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements exist. Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a ...
Combine minimum collapsed height with optimum stroke. They ...
Description:
Combine minimum collapsed height with optimum stroke. They provide a short adjusting and lifting force in confined work areas. Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension.