Fluke I430-FLEXI-TF-II Power Quality Analyser Clamp, Accessory Type Flexible AC Current Probe

  • RS Stock No. 818-7357
  • Mfr. Part No. I430-FLEXI-TF-II
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): RO
Product Details

i430-Flexi-TF-II 6000A Flexible AC Current Probe

The i430-Flexi-TF-II flexible AC current probe is optimized for current measurement on thick and hard to reach conductors. The i430-Flexi-TF-II is a flexible AC current probe for use with the Fluke 430 series Power Quality Analyzers including Series II.

Measuring range: 0.5 to 6000 A ac
Bandwidth (-3 dB): 10 Hz to 10 kHz
Output signal: 86.6 mV at 1000A/50Hz (on 1 MΩ), 85.0 mV at 1000A/50Hz (on 50 kΩ)
Maximum non-destructive current: 100 kA (50/60 Hz)
Transducer length: 610 mm (24 in)
Transducer diameter: 7.5 mm (0.3 in)
Minimum bending radius: 38 mm (1.5 in)
Cable length from transducer to BNC: 2.5 m (98.4 in)
Complies with: IEC 61010-1: Pollution degree 2, IEC 61010-2-032: 1000V CAT III/ 600V CAT IV, IEC 61010-031

Supplied with

Instruction Sheet

Fluke Flexible AC Current Probe

The Fluke flexible AC current probe has a current measuring range from 0.5A to 6000A. This lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source. It is also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4 pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Supplied with
Instruction Sheet

Features and Benefits

Bandwidth (-3dB): 10Hz to 10kHz
Output signal is 86.6mV at 1000A/50Hz (on 1 Mohm), 85.0mV at 1000A/50Hz (on 50kohm)
Maximum non-destructive current is 100kA (50/60Hz)
The transducer length is 610mm (24in)
The transducer diameter is 7.5mm (0.3in)
Minimum bending radius is 38mm (1.5in)
Cable length from transducer to BNC: 2.5m (98.4in)

Certifications

IEC 61010-1: Pollution degree 2
IEC 61010-2-032: 1000V CAT III/ 600V CAT IV safety rated
IEC 61010-031
UL94 approved
IP41 rated
CE
CSA certified

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specifications
Attribute Value
Accessory Type Flexible AC Current Probe
For Use With Fluke 433/434/435/434-II/435-II/437-II
19 In stock for delivery within 1 working days
Price Each
kr 4 183,45
(exc. VAT)
kr 5 229,31
(inc. VAT)
Units
Per unit
1 +
kr 4 183,45
Related Products
The Fluke i30s AC/DC current clamp has a ...
Description:
The Fluke i30s AC/DC current clamp has a current rating of 300AAC and 450ADC. It is a state of the art device used with oscilloscopes and digital multimeters for accurate non-intrusive measurement and complex waveform currents. Output cable and connections ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k. Hz bandwidth. Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable. ...
Portable hand held single phase power quality analyzer ...
Description:
Portable hand held single phase power quality analyzer ideal for maintenance, inspection and testing of electrical installations and electrical networks. It can be used for a snapshot of the main characteristics of a network and to track variations of the ...
Fluke power quality analysers help locate, predict, prevent ...
Description:
Fluke power quality analysers help locate, predict, prevent and troubleshoot problems in power distribution systems and include many features to capture details to pinpoint problems quickly and safely. Troubleshooting is fast with on-screen display of trends and captured events, even ...