Siemens Eye Bolt
- RS Stock No.:
- 749-7739
- Mfr. Part No.:
- 3SE7920-1AB
- Brand:
- Siemens
Price Each**
Kr. 145,54
(exc. VAT)
Kr. 181,92
(inc. VAT)
20 In stock for same day dispatch*
10 available from Europe for delivery within 2 working day(s)
* Delivery dates may change based on your chosen quantity and delivery address.
FREE delivery for orders over kr 500,00
Units | Per unit |
---|---|
1 + | Kr. 145,54 |
**price indicative
- RS Stock No.:
- 749-7739
- Mfr. Part No.:
- 3SE7920-1AB
- Brand:
- Siemens
- COO (Country of Origin):
- CN
3SE7 Emergency Grab Wire Switch
The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.
As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems.
As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems.
Design
The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts.
The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m.
The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m.
Function
The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position.
Positive latching and positive NC contacts
Switches for wire lengths up to 75m
Metal housing
Enclosure is screw mounted
IP67 rating
Operating temperature: -25 to +70°C
Switches for wire lengths up to 75m
Metal housing
Enclosure is screw mounted
IP67 rating
Operating temperature: -25 to +70°C
Note
Approvals
UL,CSA
Standards
The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1.
Siemens Eyebolt, Steel, M8 Size - 3SE7920-1AB
This eye bolt accessory is intended for rope tensioning systems, offering reliable support across various industrial applications. Its robust design ensures durability and effective operation, making it an important component for effective rope management. This tensioning equipment addresses essential needs in the automation, electronics, and mechanical industries.
Features & Benefits
• Heavy-duty steel construction provides durability and strength
• M8 eyebolts come with a nut for straightforward installation
• Lightweight design enables easy handling and setup
• General product approval increases user confidence in safety
• Compatible with a range of mechanical tensioning devices
• Designed for seamless integration into industrial rope accessories
• M8 eyebolts come with a nut for straightforward installation
• Lightweight design enables easy handling and setup
• General product approval increases user confidence in safety
• Compatible with a range of mechanical tensioning devices
• Designed for seamless integration into industrial rope accessories
Applications
• Utilised with mechanical tensioning devices for tension control
• Suitable for securing ropes in various industrial environments
• Incorporated in rope management systems to maintain optimal tension
• Appropriate for heavy-duty that require robust support
• Suitable for securing ropes in various industrial environments
• Incorporated in rope management systems to maintain optimal tension
• Appropriate for heavy-duty that require robust support
What materials are used in the eyebolts?
These eyebolts are made from steel, ensuring strength and durability.
Is this accessory suitable for outdoor use?
Yes, it can endure various environmental conditions typically encountered in industrial settings.
How much weight can the eyebolts support?
The specific load capacity is dependent on the rigging setup and the configurations used.
Are installation guides available for this component?
Yes, comprehensive installation documentation is generally provided to assist users.
Can it be used in conjunction with other tensioning solutions?
It is designed to work effectively with various mechanical tensioning devices.
Attribute | Value |
---|---|
Accessory Type | Eye Bolt |