Weidmuller ACT20X Series Signal Conditioner, RTD Input, Current Output, 30V Supply

Weidmuller MCZ series RTD signal converter in terminal design. Suitable for the connection of 2 and 3 wire PT100 sensors with a current loop 4 ... 20 mA signal on the output side.

Mini set-point controller in terminal design
Tension clamp connection
1 module width (6mm)
DIN Rail mount

Turn raw temperature readings into usable data with this signal conditioner from Weidmuller. You can use it to convert input signals from a two or three-wire RTD temperature sensor (611-8264) into a current output for your data acquisition system. As it mounts directly onto a DIN rail, you can install it in a jiffy without the need for any special tools. Thanks to a broad input temperature range between 0°C and +100°C, this piece of kit is an all-rounder for your temperature conversion needs.

• Tension clamp provides a reliable electrical connection
• Functions reliably in harsh environments, thanks to a wide operating temperature range between -25°C and +50°C
• High accuracy rating of 0.2% for readings you can depend on
• Supply voltage of 30V for use in low-power applications

• Food and beverage production
• Chemical plants
• Industrial engineering
• Sound amplification

It has an output current range between 4 and 20mA, so it's a great shout for low-current devices.