FLUKE-725/9102/RS Drywell Calibrator, 24mA dc, 0 → 30V dc
- RS Stock No.:
- 536-990
- Mfr. Part No.:
- FLUKE-725/9102/RS
- Brand:
- Fluke
Discontinued product
- RS Stock No.:
- 536-990
- Mfr. Part No.:
- FLUKE-725/9102/RS
- Brand:
- Fluke
- COO (Country of Origin):
- US
Fluke 725 & 9102S Drywell Temperature Calibrator Kit
Drywell Calibration Kits comprising the Fluke 725 process calibrator and 9102S drywell heat source
725 features
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
9102S features
Contact temperature calibration over a range of -10°C to 122°C
A stable and uniform heat source
Fast to change temperature to set point with short stabilization times
Accuracy to 0.25°C and stability to 0.05°C
Removable insert sleeves supplied allow various diameter probes to be accommodated
A stable and uniform heat source
Fast to change temperature to set point with short stabilization times
Accuracy to 0.25°C and stability to 0.05°C
Removable insert sleeves supplied allow various diameter probes to be accommodated
Supplied with
725 process calibrator, test leads/clips, protective yellow holster; 9102S drywell, batteries, 9102S power Cord, RS-232 Cable, 9930 Interface-it Software.
Fluke 725 Drywell Calibration Kits
The Fluke 725 Drywell Calibration Kits couples the Fluke 725 with a highly portable and compact drywell heat source with a saving over buying the products separately.,The kit offers a rugged, handheld solution for the accurate calibration of temperature sensors and troubleshooting of process control instrumentation.
Attribute | Value |
---|---|
Thermocouple Type | B, E, J, K, L, N, R, S, T, U |
Length | 175mm |
Width | 152mm |
Dimensions | 175 x 152 x 100mm |
Height | 100mm |
Model Number p | 725 |
Weight | 1.8kg |