Float Valves

Float valves are an integral part of a cistern or tank. Their sole purpose is to shut off the flow of water at a predetermined level. The most common valves in bathroom toilets are called Torbeck float valves and ball-cock float valves are found in water tanks usually located in a loft. How do they work? When a toilet is flushed or a water tank is emptied a lever float arm rises as water enters. This lever action shuts of the water feed at a predetermined level. How do you adjust float valves? These valves can be adjusted to get the perfect setting, in the case of a Torbeck all you need to do is turn the float mechanism up or down. Brass float valves dont have an adjustable feature however during installation if the water levels are too high bending the arm downwards can help regulate the water flow. How much would it cost to change a float valve? These valves are relatively inexpensive parts and are an ideal candidate for DIY installation. They are easy to replace and we offer a range of float valves to meet your needs and applications. Installation costs incur when a professional plumber is employed. What are they made from? Torbeck float valves in cistern or toilets are typically made from plastic and are available in a side entry or bottom entry design. Ballcock float valves in water tanks are usually made from copper or brass, suitable for high-pressure water. Types of Float valves Torbeck float valve Ball float valves Ball-cock float valveApplications Information Float valves are used by plumbers, maintenance operatives and DIY enthusiasts in the home or in industrial applications.

...
Read more Read less

Filters

Viewing 1 - 9 of 9 products
Results per page
Description Price Compatible Float 1 Type Compatible Float 2 Connection Size Lever Thread Size Maximum Working Pressure Float Included Compatible Float Diameter 1 Compatible Float Diameter 2 Float Material 1 Float Material 2
RS Stock No. 784-5620
BrandRS PRO
kr 211,56
Each
Units
- Side Entry - 1/2in - 16 bar Yes - - - -
RS Stock No. 802-086
BrandRS PRO
kr 230,19
Each
Units
- Bottom Entry - 1/2in - 14 bar - - - - -
RS Stock No. 797-322
Mfr. Part No.516007
kr 103,46
Each
Units
4-1/2 in Plastic High Pressure - 1/2in 5/16in 14 bar - 4-1/2in - Plastic -
RS Stock No. 797-316
Mfr. Part No.514017
kr 94,38
Each
Units
4-1/2 in Copper Portsmouth 4-1/4 in Plastic 1/2in 5/16in 14 bar - 4-1/2in 4-1/4in Copper Plastic
RS Stock No. 802-070
BrandRS PRO
kr 145,81
Each
Units
- Side Entry - 1/2in - 14 bar - - - - -
RS Stock No. 784-5611
BrandRS PRO
kr 330,89
Each
Units
- Bottom Entry - 1/2in - 16 bar Yes - - - -
RS Stock No. 281-4031
Mfr. Part No.514079
kr 971,67
Each
Units
6 in Copper Portsmouth 6 in Plastic 1in 7/16in 14 bar - 6in 6in Copper Plastic
RS Stock No. 197-867
Mfr. Part No.514078
kr 349,38
Each
Units
5-1/2 in Copper Portsmouth 5 in Plastic 3/4in 5/16in 14 bar - 5-1/2in 5in Copper Plastic
RS Stock No. 542-6570
BrandRS PRO
kr 230,80
Each
Units
- Bottom Entry - 1/2in - - - - - - -
Related Products
Air eliminators AE30 and AE30A have been specifically ...
Description:
Air eliminators AE30 and AE30A have been specifically designed for the removal of air and other non-condensible gases from industrial and commercial hot and chilled water systems. This then improves the circulation of the pressurized liquids. Typical areas where this ...
The AE16SS stainless steel air eliminator removes air ...
Description:
The AE16SS stainless steel air eliminator removes air from HVAC systems and is also suitable for non corrosive and/or dangerous liquids providing that their specific weight is not less than 0,75Kg/dm3.This ball float type automatic air eliminator can be used ...
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar. Rising Stem. Threaded bonnet. Renewable disc which is suitable for steam service. Bronze trim with glass filled ...
RS Brand Stainless Steel Screwed End Ball Valves ...
Description:
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment casting. Blow-out proof stem. Locking deviceISO 5211 Mounting pad. Thread type: ASME B1.20.1 ...