End Mills

An end mill is a type of cutting tool that is used in milling applications. They have cutting edges on the end and sides of the shank enabling them to cut in all directions.The purpose of an end millThe end mill remove material by their movement within the milling machine or from the cutters shape.The number of flutes (spirals on the end mill) give different results 2 flute allows maximum space for chip ejection and is used for general milling operations 3 flute is an excellent choice for slotting, it has a larger cross section and is used in general milling operations 4, 5, 6 and 8 flute can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finishEnd cut types Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut. Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.Shank Types End mills with a plain shank are used with a collet style holder and are the most common shank type End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it from rotatingTypical applicationsEnd mills are used for profiling milling, face milling, tracer milling, semi-finishing and finishing.

...
Read more Read less

Filters

Viewing 61 - 80 of 84 products
Results per page
Description Price Cutter Diameter Cut Length Number of Flutes Material Overall Length Shank Type Shank Diameter Centre Cutting Diameter Tolerance
RS Stock No. 728-7853
Mfr. Part No.C2471/2
BrandDormer
kr 904,21
Each
Units
1/2in 26mm 4 HSS-E-PM 83 mm Weldon 12 mm - K10
RS Stock No. 666-6726
Mfr. Part No.S90416.0
BrandDormer
kr 828,44
Each
Units
16mm 32mm 4 Solid Carbide 92 mm Plain 16 mm Yes H12
RS Stock No. 666-6690
Mfr. Part No.S9042.5
BrandDormer
kr 193,40
Each
Units
2.5mm 9mm 4 Solid Carbide 38 mm Plain 3 mm Yes H12
RS Stock No. 866-0619
Mfr. Part No.25A2R042B25-SLN12-C
BrandPramet
kr 2 467,11
Each
Units
25mm 42mm 2 - 99 mm Weldon 25 mm - H6
RS Stock No. 666-6713
Mfr. Part No.S9048.0
BrandDormer
kr 254,22
Each
Units
8mm 19mm 4 Solid Carbide 63 mm Plain 8 mm Yes H12
RS Stock No. 728-7945
Mfr. Part No.C27318.0
BrandDormer
kr 1 343,85
Each
Units
18mm 63mm 4 HSCo 123 mm Weldon 16 mm Yes K10
RS Stock No. 185-7558
BrandRS PRO
kr 2 277,59
Pr. Set
Set(s)
3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm 9.5 mm, 12.5 mm, 16 mm, 18 mm, 21 mm, 24 mm, 28.5 mm, 35 mm, 38 mm 4 HSCo 54 mm, 57 mm, 60.5 mm, 63.5 mm, 66.5 mm, 70 mm, 73 mm, 77 mm, 80 mm, 83.5 mm Screwed 6 mm, 12 mm, 16 mm Yes BS 122/4
RS Stock No. 728-7995
Mfr. Part No.C24712.0
BrandDormer
kr 659,96
Each
Units
12mm 26mm 4 HSCo 83 mm Weldon 12 mm Yes K10
RS Stock No. 728-7866
Mfr. Part No.C2475/8
BrandDormer
kr 1 015,86
Each
Units
5/8in 32mm 4 HSS-E-PM 92 mm Weldon 16 mm - K10
RS Stock No. 523-0509
BrandRS PRO
kr 81,79
Each
Units
5mm 7.5mm 3 HSCo 36 mm Weldon 6 mm - -
RS Stock No. 728-7964
Mfr. Part No.C2475.0
BrandDormer
kr 414,72
Each
Units
5mm 13mm 4 HSCo 57 mm Weldon 6 mm Yes K10
RS Stock No. 666-6735
Mfr. Part No.S90418.0
BrandDormer
kr 983,96
Each
Units
18mm 32mm 4 Solid Carbide 92 mm Plain 18 mm Yes H12
RS Stock No. 666-6716
Mfr. Part No.S9049.0
BrandDormer
kr 315,03
Each
Units
9mm 21mm 4 Solid Carbide 72 mm Plain 10 mm Yes H12
RS Stock No. 728-7897
Mfr. Part No.C2731/4
BrandDormer
kr 1 083,66
Each
Units
1/4in 30mm 4 HSS-E-PM 80 mm Weldon 10 mm - K10
RS Stock No. 728-7901
Mfr. Part No.C2738.0
BrandDormer
kr 481,51
Each
Units
8mm 38mm 4 HSCo 88 mm Weldon 10 mm Yes K10
RS Stock No. 728-7998
Mfr. Part No.C24714.0
BrandDormer
kr 824,46
Each
Units
14mm 26mm 4 HSCo 83 mm Weldon 12 mm Yes K10
RS Stock No. 728-7920
Mfr. Part No.C27314.0
BrandDormer
kr 904,21
Each
Units
14mm 53mm 4 HSCo 110 mm Weldon 12 mm Yes K10
RS Stock No. 728-7908
Mfr. Part No.C2733/8
BrandDormer
kr 474,54
Each
Units
3/8in 45mm 4 HSS-E-PM 95 mm Weldon 10 mm - K10
RS Stock No. 728-7829
Mfr. Part No.C2472.0
BrandDormer
kr 431,67
Each
Units
2mm 7mm 4 HSCo 51 mm Weldon 6 mm Yes K10
RS Stock No. 728-7894
Mfr. Part No.C2736.0
BrandDormer
kr 488,49
Each
Units
6mm 24mm 4 HSCo 68 mm Weldon 6 mm Yes K10
Related Products
These slot drills have a parallel shank with ...
Description:
These slot drills have a parallel shank with flats, diameter tolerance e8 (undersize h10), 3 flute, short length, centre cutting, 30° spiral, HSCo 8%. They are to DIN327 form D. Applications include keyway and slot milling, and production of closed ...
A range of standard length and long series ...
Description:
A range of standard length and long series Clarkson Osborn FC3 throw-away milling cutters. Manufactured from High Speed Cobalt steel (HSSE) and intended for use in Clarkson FC3 Holders and adaptors.
Introducing the Dormer's multi-application MC-X solid carbide end ...
Description:
Introducing the Dormer's multi-application MC-X solid carbide end mills cutters that are manufactured from micro-grain, high-quality carbide to provide increased hardness and toughness for excellent wear-resistance and long tool life. The flute geometry of the 4 flute cutters is capable ...
HSCo-XP flatted shank for machining profiles and steps, ...
Description:
HSCo-XP flatted shank for machining profiles and steps, as well as finishing operations in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased wear resistance and tool life. Superior edge strength and rigidity resulting in improved surface finish and ...