Nexperia Octal D Type Latch, 8-Bit Non-Inverting, 20-Pin SO

RS Stock No.:: 170-5429P
Mfr. Part No.:: 74HCT373D,653
Brand:: Nexperia

Nexperia Octal D Type Latch, 8-Bit Non-Inverting, 20-Pin SO

Bulk discount available

Subtotal 125 units (supplied on a continuous strip)*

Kr. 479,375

(exc. VAT)

Kr. 599,25

(inc. VAT)

Stock information currently inaccessible - Please check back later

Units	Per unit
125 - 475	Kr. 3,835
500 - 1225	Kr. 3,647
1250 +	Kr. 2,906

*price indicative

RS Stock No.:: 170-5429P
Mfr. Part No.:: 74HCT373D,653
Brand:: Nexperia

Specifications

Technical Reference

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Nexperia
	Logic Family	74HCT
	Product Type	Octal D Type Latch
	Logic Function	D Type
	Number of Channels	8
	Polarity	Non-Inverting
	Mount Type	Surface
	Package Type	SO
	Pin Count	20
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	Input Level	TTL
	Minimum Operating Temperature	-40°C
	Maximum Propagation Delay Time @ CL	45ns
	Maximum Operating Temperature	125°C
	Width	7.6 mm
	Series	74HCT
	Standards/Approvals	No
	Length	13mm
	Height	2.45mm
	Output Type	3 State
	Automotive Standard	No

	Select all
	Brand Nexperia
	Logic Family 74HCT
	Product Type Octal D Type Latch
	Logic Function D Type
	Number of Channels 8
	Polarity Non-Inverting
	Mount Type Surface
	Package Type SO
	Pin Count 20
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	Input Level TTL
	Minimum Operating Temperature -40°C
	Maximum Propagation Delay Time @ CL 45ns
	Maximum Operating Temperature 125°C
	Width 7.6 mm
	Series 74HCT
	Standards/Approvals No
	Length 13mm
	Height 2.45mm
	Output Type 3 State
	Automotive Standard No

COO (Country of Origin):: CN

The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to Interface inputs to voltages in excess of VCC.

Low switch leakage

Nexperia Octal D Type Latch, 8-Bit Non-Inverting, 20-Pin SO

Related links