Knipex, 97 Crimping Die Set, Uninsulated Terminals
- RS Stock No.:
- 667-7744
- Mfr. Part No.:
- 97 39 13 RS
- Brand:
- Knipex
Subtotal (1 unit)**
Kr. 728,62
(exc. VAT)
Kr. 910,78
(inc. VAT)
2 In stock for dispatch same day*
* Delivery dates may change based on your chosen quantity and delivery address.
FREE delivery for orders over kr 500,00
Units | Per unit |
|---|---|
| 1 + | Kr. 728,62 |
**price indicative
- RS Stock No.:
- 667-7744
- Mfr. Part No.:
- 97 39 13 RS
- Brand:
- Knipex
RoHS Status: Not Applicable
- COO (Country of Origin):
- DE
MultiCrimp crimp tool
High quality Knipex crimping tool with additional 3 or 5 interchangeable crimping die. These handheld crimp tools are designed to compress pieces of material together with the size of 0.5 to 6mm² with the crimping dies being able to change quickly and easy without any additional tool. This is just the one tool with the extra most common crimping applications in a round magazine so this saves space and time whilst working on the job. This crimp tool offers a range of services of five pairs of crimp tools within a single tool.
484-815 The three interchangeable crimping dies in the quick die change round magazine can be used in a wide range of applications:-
• Non-insulated, open plug connectors from 0.5 to 6.0 mm² (plug width 4.8 + 6.3 mm)
• Insulated cable lugs, plug connectors and butt connectors from 0.5 to 6.0 mm²
• Insulated and non-insulated end sleeves from 0.25 to 6.0 mm²
484-798 The five interchangeable crimping dies in the quick die change round magazine can be used in a wide range of applications:-
• Non-insulated plug connectors with open cable entry from 0.5 to 6mm² (plug width 4.8 + 6.3 mm)
• Insulated cable lugs, plug connectors and butt connectors from 0.5 to 6mm²
• Insulated and non-insulated end sleeves (ferrules) from 0.25 to 6mm², and 10/16 and 25mm²
• Non-insulated crimp terminals, tubular cable lugs and compression cable lugs in accordance with DIN 46234 and DIN 46235
• Non-insulated crimp terminals, butt connectors and press connectors in accordance with DIN 46341 and DIN 46267 of 0.5 to 10mm²
The quick crimping die change are inserted in the front of the crimping tool with the locking system developed for this crimp tool connects the dies to the tool with zero backlash and friction making the changes simple and easy. This crimping tool also automatically adjusts to the size of the bootlace ferrule to make sure accurate work is performed with each crimp. This feature allows the user not to spend time measuring the force when crimping because the crimping tool integral lock with release mechanism ensures the right amount of pressure automatically reaches the bootlace ferrule.
484-815 The three interchangeable crimping dies in the quick die change round magazine can be used in a wide range of applications:-
• Non-insulated, open plug connectors from 0.5 to 6.0 mm² (plug width 4.8 + 6.3 mm)
• Insulated cable lugs, plug connectors and butt connectors from 0.5 to 6.0 mm²
• Insulated and non-insulated end sleeves from 0.25 to 6.0 mm²
484-798 The five interchangeable crimping dies in the quick die change round magazine can be used in a wide range of applications:-
• Non-insulated plug connectors with open cable entry from 0.5 to 6mm² (plug width 4.8 + 6.3 mm)
• Insulated cable lugs, plug connectors and butt connectors from 0.5 to 6mm²
• Insulated and non-insulated end sleeves (ferrules) from 0.25 to 6mm², and 10/16 and 25mm²
• Non-insulated crimp terminals, tubular cable lugs and compression cable lugs in accordance with DIN 46234 and DIN 46235
• Non-insulated crimp terminals, butt connectors and press connectors in accordance with DIN 46341 and DIN 46267 of 0.5 to 10mm²
The quick crimping die change are inserted in the front of the crimping tool with the locking system developed for this crimp tool connects the dies to the tool with zero backlash and friction making the changes simple and easy. This crimping tool also automatically adjusts to the size of the bootlace ferrule to make sure accurate work is performed with each crimp. This feature allows the user not to spend time measuring the force when crimping because the crimping tool integral lock with release mechanism ensures the right amount of pressure automatically reaches the bootlace ferrule.
Features and Benefits
• One tool that offers 3 or 5 different services with the most common crimping applications
• 3 or 5 interchangeable crimping die stored in a round magazine
• Crimping Pressure has been set precisely (calibrated) in the factory – also adjustable
• Repetitive, high crimping quality due to integral lock, self-releasing mechanism
• Ergonomically-shaped, two-colour multi-component holsters for single and two-handed operation
• Chrome vanadium electric steel in special quality, oil-hardened
• 3 or 5 interchangeable crimping die stored in a round magazine
• Crimping Pressure has been set precisely (calibrated) in the factory – also adjustable
• Repetitive, high crimping quality due to integral lock, self-releasing mechanism
• Ergonomically-shaped, two-colour multi-component holsters for single and two-handed operation
• Chrome vanadium electric steel in special quality, oil-hardened
Typical Applications
Crimping tools can be used for a variety of applications:-
• Maintenance & repair
• Electrical Installations
• Cable assemblies
How to maintain the product?
• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly
*Use a light mineral-free oil
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage
• Maintenance & repair
• Electrical Installations
• Cable assemblies
How to maintain the product?
• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly
*Use a light mineral-free oil
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage
Crimp die set 97 39 13
Die for Knipex MultiCrimp® 97 33 01 / 97 33 02 or RS 484-815
For non-insulated cable lugs, crimp lugs and press-fit lugs to DIN 46234 and DIN 46235 as well as extensions, crimp connectors and non-insulated press-fit connectors to DIN 46341 and DIN 46367
The high-quality Knipex MultiCrimp® crimping tool with 3 or 5 additional interchangeable crimping dies. These portable hand crimpers are designed to crimp connectors onto a multi-strand wire.
The crimping dies can be changed quickly and easily without additional tools. It is the only tool with the most common crimping applications in a holster, saving time and space while working. This crimper offers the same services as five pairs of crimping pliers in one tool.
The crimping dies can be changed quickly and easily without additional tools. It is the only tool with the most common crimping applications in a holster, saving time and space while working. This crimper offers the same services as five pairs of crimping pliers in one tool.
The three interchangeable crimping dies in the round quick-change die compartment can be used in a wide range of applications:
- Non-insulated open plug connectors from 0.5 to 6 mm² (plug width 4.8 + 6.3 mm)
- Insulated cable lugs, plugs and butt connectors between 0.5 and 6 mm².
- Insulated and non-insulated end sleeves from 0.25 to 6 mm².
The five interchangeable crimp dies in the round quick-change die compartment can be used in a wide range of applications:
- Non-insulated open cable entry male connectors from 0.5 to 6 mm² (plug width 4.8 + 6.3 mm)
- Insulated cable lugs, male connectors and butt connectors between 0.5 and 6 mm².
- Insulated and non-insulated end sleeves from 0.25 to 6 mm², and 10 / 16 and 25 mm².
- Non-insulated crimp lugs, tubular cable lugs and compression cable lugs in accordance with DIN 46234 and DIN 46235
- Non-insulated crimp lugs, butt connectors and pressure connectors in accordance with DIN 46341 and DIN 46267 from 0.5 to 10 mm²
- Insulated cable lugs, plugs and butt connectors between 0.5 and 6 mm².
- Insulated and non-insulated end sleeves from 0.25 to 6 mm².
The five interchangeable crimp dies in the round quick-change die compartment can be used in a wide range of applications:
- Non-insulated open cable entry male connectors from 0.5 to 6 mm² (plug width 4.8 + 6.3 mm)
- Insulated cable lugs, male connectors and butt connectors between 0.5 and 6 mm².
- Insulated and non-insulated end sleeves from 0.25 to 6 mm², and 10 / 16 and 25 mm².
- Non-insulated crimp lugs, tubular cable lugs and compression cable lugs in accordance with DIN 46234 and DIN 46235
- Non-insulated crimp lugs, butt connectors and pressure connectors in accordance with DIN 46341 and DIN 46267 from 0.5 to 10 mm²
Caractéristiques et avantages :
The Knipex MultiCrimp® crimping tool offers 3 or 5 crimping tools depending on the MultiCrimp® part number chosen
Economical
Professional
Weight reduction.
Economical
Professional
Weight reduction.
Weight: about 40g
Special quality oil-hardened vanadium chrome electric steel
Maintenance tips :
Product maintenance
*Use a light non-mineral oil.
Importance of high quality crimping
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure
- To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked.
- Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil.
Importance of high quality crimping
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure
Attribute | Value |
|---|---|
| Crimp Connector Type | Uninsulated Terminals |
| Minimum Wire Size mm² | 0.5mm² |
| Maximum Wire Size mm² | 10mm² |
| Minimum Wire Size AWG | 20AWG |
| Maximum Wire Size AWG | 8AWG |
| Terminal Insulation | Uninsulated |
| Number of Ports | 4 |
| For Use With | MultiCrimp® crimping plier - 97 33 01 / 97 33 02 |
| Series | 97 |