Sensata / Cynergy3 RSF100 Series Vertical Polyphenylene Sulfide Float Switch, 1m Cable, NO/NC, 240V ac Max, 120V dc Max

RSF100 series float switches from cynergy3 are a range of miniature vertical float switch. These float switches require external mounting and feature a single switching point.

• This series features an N/O (normally open) contact. However, this can easily be reversed to N/C (normally closed) by inverting the float and reattaching it to the stem.
• The float attached to this switch is small and compact allowing you to use this float switch in applications where space is at a premium.
• You can mount this float switch externally using a compression seal at the top or bottom of a tank. You do not need access to the inside of the tank that you will be using the float switch in.
• A choice of 25 W or 100 W models are available.
• These float switches are available in a range of materials; nylon, polypropylene, PPS and PVDF. The choice of construction material will enable you to choose the right float switch for your application. Float switches made from PVDF can withstand acids and alkalis.
• Dependent on model, this range of float switches feature an M12 connector or PVC/PTFE cable.

Keep liquids in your tank at optimal levels using this float switch from Sensata Cynergy3. It uses a floating element that monitors the liquid level and sends a signal to the control unit if it detects a rise or fall in the liquid, helping to prevent overfilling or underfilling. For versatility, you can adjust the switch configuration from NO to NC by inverting the float and reattaching it to the stem. This type of float switch is commonly used in applications like food production facilities.

• Maximum switching current of 600mA for energy-efficient operation
• Viton gasket is chemical-resistant to withstand harsh conditions
• Polyphenylene sulfide body for resistance to chemicals and wear

This unit is designed for vertical mounting, so you can fit it at the top or bottom of your tank using the built-in compression seal. This makes it suitable for tanks that don't have side access. As it's an external float switch, you don't need to access the interior of the tank to install it.