ITT Cannon, Tin Crimp Pin Connector
- RS Stock No.:
- 466-804
- Brand:
- ITT Cannon
Image representative of range
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 466-804
- Brand:
- ITT Cannon
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ITT Cannon | |
| Overall Length | 27.69mm | |
| Contact Plating | Tin | |
| Contact Material | Brass | |
| Select all | ||
|---|---|---|
Brand ITT Cannon | ||
Overall Length 27.69mm | ||
Contact Plating Tin | ||
Contact Material Brass | ||
Crimp Single Piece Contacts
Single piece, formed construction
Tin plated brass inserts
Tin plated brass inserts
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Related links
- RS PRO Insulated 0.5mm² to 1.5mm² 1.9mm Pin Diameter Red
- RS PRO Insulated 4mm² to 6mm² 2.8mm Pin Diameter Yellow
- RS PRO Uninsulated 10mm² to 10mm² 4.3mm Pin Diameter Silver
- TE Connectivity Tin Crimp Pin Connector Grey
- Wurth Elektronik Tin Crimp Pin Connector 4mm²
- TE Connectivity Tin Crimp Pin Connector 22AWG, Grey
- Molex Tin Crimp Pin Connector 9.91mm Pin Length, Red
- TE Connectivity Tin Crimp Pin Connector 1.8mm Pin Diameter Red