Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 1 - 20 of 588 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 809-2375
BrandRS PRO
kr 0,66
Each (In a Pack of 100)
Units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 841-7670
BrandRS PRO
kr 1,011
Each (In a Pack of 100)
Units
Butt - 6 mm² - 20mm 5.9mm - Uninsulated - - - - - -
RS Stock No. 239-3988
BrandRS PRO
kr 181,73
1 Box of 100
Box(es)
Butt - 26 → 19 AWG - - 2.08mm - Insulated - - Yellow - PP -
RS Stock No. 534-648
BrandRS PRO
kr 1,35
Each (In a Pack of 100)
Units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.5mm 4.8mm 16AWG Insulated 14AWG - Blue - PVC -
RS Stock No. 613-9794
BrandRS PRO
kr 1,526
Each (In a Pack of 100)
Units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.2mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 534-648A
BrandRS PRO
kr 612,46
1 Pack of 1000
Pack(s)
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.5mm 4.8mm 16AWG Insulated 14AWG - Blue - PVC -
RS Stock No. 809-2388
BrandRS PRO
kr 1,079
Each (In a Pack of 100)
Units
Butt 4mm² 12 → 10 AWG 6mm² 20mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 534-288
BrandRS PRO
kr 1,357
Each (In a Pack of 100)
Units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.5mm 4mm 22AWG Insulated 16AWG - Red - PVC -
RS Stock No. 208-2688
BrandRS PRO
kr 0,964
Each (In a Pack of 100)
Units
Butt 1mm² 1 → 2.5 mm² 2.5mm² - - - Uninsulated - - - - - -
RS Stock No. 534-288A
BrandRS PRO
kr 636,98
1 Pack of 1000
Pack(s)
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.5mm 4mm 22AWG Insulated 16AWG - Red - PVC -
RS Stock No. 809-2381
BrandRS PRO
kr 1,414
Each (In a Pack of 50)
Units
Parallel - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS Stock No. 510-4804
BrandRS PRO
kr 255,93
1 Bag of 100
Bag(s)
Butt - 26 → 19 AWG - 19.5mm 8.4mm 26AWG Insulated 19AWG - Red, White - - -
RS Stock No. 809-2363
BrandRS PRO
kr 0,612
Each (In a Pack of 100)
Units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 205-0710
BrandRS PRO
kr 1,286
Each (In a Pack of 100)
Units
Closed End 1.5mm² 1 → 2.6 mm² 2.5mm² 21mm 7.4mm 16AWG Insulated 14AWG - Clear - Nylon -
RS Stock No. 510-4775
BrandRS PRO
kr 215,55
1 Bag of 100
Bag(s)
Butt - 26 → 22 AWG - 12.5mm 7.9mm 26AWG Insulated 22AWG - White, Yellow - - -
RS Stock No. 534-519
BrandRS PRO
kr 2,009
Each (In a Pack of 100)
Units
Butt 4mm² 12 → 10 AWG 6mm² 24.5mm 5.8mm 12AWG Insulated 10AWG - Yellow - PVC -
RS Stock No. 613-9788
BrandRS PRO
kr 1,099
Each (In a Pack of 100)
Units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 510-4810
BrandRS PRO
kr 16,13
1 Bag of 50
Bag(s)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 27mm 20mm 22AWG Insulated 18AWG - Red - PP -
RS Stock No. 613-9772
BrandRS PRO
kr 1,178
Each (In a Pack of 100)
Units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 16.5mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 267-3997
BrandRS PRO
kr 1,291
Each (In a Pack of 100)
Units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 31mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
Related Products
The Highland™ series has been specially designed to ...
Description:
The Highland™ series has been specially designed to offer effective and reliable performance in in a variety of applications. There is a wide variety of terminals, disconnects and connectors and are ideally suited in the assembly and maintenance of electrical ...
PIDG radiation resistant butt splice crimp terminals made ...
Description:
PIDG radiation resistant butt splice crimp terminals made from high conductivity bright tin-plated copper with a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a copper sleeve and ...
D-200 Mini. Seal immersion resistant crimp splices with ...
Description:
D-200 Mini. Seal immersion resistant crimp splices with a nickel plating for use in high temperature applications of up to 200°C. These D-2100 Mini. Seal splices have heat-shrinkable transparent blue radiation cross-linked modified fluoropolymer insulation sleeves for environmental protection and ...
Cold applied in-line splices that require no heating ...
Description:
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are ...