Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 1 - 9 of 9 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 161-0197
Mfr. Part No.SCOTCHLOK 314
Brand3M
kr 9,791
Each (In a Pack of 50)
Units
- - - - - 3.8mm - - - - Blue - - -
RS Stock No. 101-7582
Mfr. Part No.560B
Brand3M
kr 1,785
Each (In a Box of 10)
Units
Tap - 18 → 16 AWG - 20.32mm 13.46mm - Insulated - - Blue - PP -
RS Stock No. 837-7099
Mfr. Part No.BSV18Q
Brand3M
kr 3,581
Each (In a Pack of 25)
Units
Butt - 22 → 18 AWG - 25.4mm - - Insulated - - Red - Vinyl -
RS Stock No. 837-7080
Mfr. Part No.BSV14Q
Brand3M
kr 2,983
Each (In a Pack of 25)
Units
Butt - 16 → 14 AWG - 25.4mm - - Insulated - - Blue - Vinyl -
RS Stock No. 837-7046
Mfr. Part No.952X
Brand3M
kr 3,001
Each (In a Pack of 50)
Units
T-Tap - 0.8 → 2 mm², 18 → 14 AWG - 36.58mm - - Insulated - - Blue - Nylon -
RS Stock No. 842-0269
Mfr. Part No.952K-BULK
Brand3M
kr 2 572,16
1 Pack of 1000
Pack(s)
T-Tap - 18 → 14 AWG - 18.54mm - - Insulated - - Blue - Nylon -
RS Stock No. 837-7011
Mfr. Part No.512-BAG
Brand3M
kr 1,366
Each (In a Pack of 500)
Units
- - 22 → 8 AWG - - - - Insulated - - Red - - -
RS Stock No. 837-7086
Mfr. Part No.BSV10Q
Brand3M
kr 3,785
Each (In a Pack of 25)
Units
Butt - 12 → 10 AWG - 25.91mm - - Insulated - - Yellow - Vinyl -
RS Stock No. 2509603396
Mfr. Part No.T/R+
Brand3M
kr 224,28
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -