Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 41 - 60 of 588 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 119-227
BrandRS PRO
kr 6,74
Each (In a Pack of 10)
Units
Butt - 35 mm² 35mm² 35mm 8.6mm - Uninsulated - - - - - -
RS Stock No. 178-7209
BrandRS PRO
kr 1,638
Each (In a Bag of 100)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 841-7689
BrandRS PRO
kr 5,206
Each (In a Pack of 50)
Units
Butt - 35 mm² - 40mm 11mm - Uninsulated - - - - - -
RS Stock No. 178-8396
BrandRS PRO
kr 0,332
Each (In a Bag of 100)
Units
- - 1.25 mm², 22 → 16 AWG 1.25mm² 15.2mm 6mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-7212
BrandRS PRO
kr 1,607
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27mm 5.2mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 510-4797
BrandRS PRO
kr 96,51
1 Bag of 100
Bag(s)
Tap - 26 → 22 AWG - 12.5mm 9.2mm 26AWG Insulated 22AWG - Blue, White - - -
RS Stock No. 458-0718
BrandRS PRO
kr 7,297
Each (In a Bag of 10)
Units
- - - - - - - Insulated - - - - - -
RS Stock No. 178-7188
BrandRS PRO
kr 8,627
Each (In a Bag of 50)
Units
- 0.5-1.5mm² 0.5-1.5 → 1.5-2.5 mm², 22-16 → 16-14 AWG 1.5-2.5mm² 36mm 1.7 (d2) mm, 2.3 (d1) mm 22-16AWG Insulated 16-14AWG - - - - -
RS Stock No. 809-2372
BrandRS PRO
kr 0,436
Each (In a Pack of 100)
Units
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 8mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 178-7200
BrandRS PRO
kr 0,788
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 178-7207
BrandRS PRO
kr 0,913
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 27.3mm 3.2mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7187
BrandRS PRO
kr 12,65
Each (In a Bag of 50)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 41mm 3.4mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 510-4860
BrandRS PRO
kr 47,76
1 Bag of 50
Bag(s)
Tap 1.5mm² 16 → 14 AWG 2.5mm² 49mm 20mm 16AWG Insulated 14AWG - Blue, Red - Nylon -
RS Stock No. 178-7178
BrandRS PRO
kr 0,467
Each (In a Bag of 100)
Units
Open Barrel 0.5mm² - 0.75mm² - - 22AWG Uninsulated 18AWG - - 19 x 6.5mm - 19mm
RS Stock No. 178-7199
BrandRS PRO
kr 0,373
Each (In a Bag of 100)
Units
- 0.2mm² 0.2 → 0.5 mm², 26 → 22 AWG 0.5mm² 12mm 2.1mm 26AWG Uninsulated 22AWG - - - - -
RS Stock No. 178-7233
BrandRS PRO
kr 0,301
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 21mm 8mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-7234
BrandRS PRO
kr 0,404
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 21mm 8mm 16AWG Insulated 14AWG - Natural - Nylon -
RS Stock No. 178-7236
BrandRS PRO
kr 0,85
Each (In a Bag of 50)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 25.5mm 10mm 12AWG Insulated 10AWG - Natural - Nylon -
RS Stock No. 178-7237
BrandRS PRO
kr 0,601
Each (In a Bag of 50)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 25.5mm 10mm 12AWG Insulated 10AWG - Natural - Nylon -
RS Stock No. 178-7179
BrandRS PRO
kr 1,721
Each (In a Bag of 50)
Units
- 0.5mm² 0.5 → 0.75 mm², 26 → 22 AWG 0.75mm² 33mm - 26AWG Insulated 22AWG - Red - PP -
Related Products
The Highland™ series has been specially designed to ...
Description:
The Highland™ series has been specially designed to offer effective and reliable performance in in a variety of applications. There is a wide variety of terminals, disconnects and connectors and are ideally suited in the assembly and maintenance of electrical ...
PIDG radiation resistant butt splice crimp terminals made ...
Description:
PIDG radiation resistant butt splice crimp terminals made from high conductivity bright tin-plated copper with a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a copper sleeve and ...
D-200 Mini. Seal immersion resistant crimp splices with ...
Description:
D-200 Mini. Seal immersion resistant crimp splices with a nickel plating for use in high temperature applications of up to 200°C. These D-2100 Mini. Seal splices have heat-shrinkable transparent blue radiation cross-linked modified fluoropolymer insulation sleeves for environmental protection and ...
Cold applied in-line splices that require no heating ...
Description:
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are ...