ESD Control, Cleanroom & PCB Prototyping

PCB is an abbreviation of printed circuit boards. Engineers will design a prototype board before it is manufactured therefore having the ability to detect flaws early on and quickly pinpoint which components need adjusting. Without prototyping, uncovering errors and flaws can cause inadequate performance which is time consuming and could extend a projects time frame, leading to lost revenue and unhappy customers.

PCBs are an integral part of many electronic devices and if there is inadequate performance after production it can be costly. Prototyping PCBs before production can help avoid this as the circuit board prototype can be tested to make sure it is working properly before moving on to a more complex design and eventually full quantity production. Prototype assembly and test gives you feedback on the strength of your circuit, PCB layout design and whether the design meets all the requirements for which it is intended e.g. functional, performance, physical requirements.

Why use a PCB Prototype?

Using a PCB prototype service over a standard PCB manufacturing production run can save time, money and also produce a more superior product at the end. When a new PCB design is being developed it will go through a number of tests which need to happen quickly otherwise this could result in lost revenue. Engineers also use prototype PCBs to test single functions of a more complex product that contains multiple PCBs. If these test functions are not looked at individually and there is a performance issue later on, the engineer will not be able to easily identify which board is causing the problem. Finding this out could take time and resources that could have been saved by prototyping the individual functions. Prototyping is worth considering if the following conditions apply:

  • New products
  • Quality design testing
  • Complex components
  • Modeling purposes

PCB Prototype Applications

PCBs connect components through various related circuits and come in different variations allowing them to perform under a wide range of circumstances. Areas include:

  • Consumer electronics
  • Medical devices
  • Automotive components
  • Industrial equipment
  • Lighting technologies
  • Aerospace instrumentation

RS PCB Prototyping area covers the following areas:

  • EMI RFI Shielding Materials
  • PCB Cleaning
  • Metal fabrication, cutting, punching, forming drilling
  • PCB etching developing
  • PCB handling
  • PCB spacers, pillars supports
ESD Control & Clean Room
ESD Control & Clean Room

PCB Etching, Preparation & Developing
PCB Etching, Preparation & Developing

PCB Handling
PCB Handling

PCB Spacers, Pillars & Supports
PCB Spacers, Pillars & Supports

PCB Tools
PCB Tools

Prototyping Boards
Prototyping Boards

3285 Products showing for ESD Control, Cleanroom & PCB Prototyping

1 of 165
In Stock
Kitronik 2444 Breadboard Prototyping Board 8.5 mm 56.5mm 165.5 mm
  • RS Stock No. 215-3175
  • Mfr. Part No. 2444
Subtotal (1 unit)
Kr. 55,27(exc. VAT)
In Stock
RS PRO Earth Bonding Plug With 10 mm Stud to M5 Post
  • RS Stock No. 218-644
Subtotal (1 unit)
Kr. 194,81(exc. VAT)
In Stock
RS PRO ESD Earthing Wire Stud With 10 mm Stud
  • RS Stock No. 287-7486
Subtotal (1 unit)
Kr. 214,57(exc. VAT)
In Stock
RS PRO ESD Field Kit 2.4m
  • RS Stock No. 123-5615
Subtotal (1 kit)
Kr. 1 434,13(exc. VAT)
In Stock
RS PRO 150 mm Jumper Wire Breadboard Jumper Wire
  • RS Stock No. 555-920
Subtotal (1 unit)
Kr. 17,56(exc. VAT)
In Stock
RS PRO Black ESD-Safe Mat Bench, 1.2 m x 600 mm x 2 mm
  • RS Stock No. 787-3114
Subtotal (1 unit)
Kr. 478,70(exc. VAT)
In Stock
CIF Carbide Tungsten PCB Drill Bit, 1 mm, 3.17mm Diameter
  • RS Stock No. 753-8619
  • Mfr. Part No. DU70
Subtotal (1 unit)
Kr. 61,66(exc. VAT)
In Stock
RS PRO ESD Grounding Cord Yellow 1.8m
  • RS Stock No. 273-6717
Subtotal (1 unit)
Kr. 227,07(exc. VAT)
In Stock
Kitronik 4110-40 200 mm Jumper Wire Breadboard Jumper Wire
  • RS Stock No. 204-8241
  • Mfr. Part No. 4110-40
Subtotal (1 unit)
Kr. 36,05(exc. VAT)
In Stock
Weller Anti-Static Wrist Strap 2.4m Cord Included
  • RS Stock No. 251-7691
  • Mfr. Part No. T0051403899
Subtotal (1 unit)
Kr. 77,41(exc. VAT)
In Stock
Vero Technologies 22-0239 Spot Face Cutter Stripboard Cutter
  • RS Stock No. 543-535
  • Mfr. Part No. 22-0239
Subtotal (1 unit)
Kr. 212,33(exc. VAT)
In Stock
Kitronik 4128 200 mm Jumper Wire Breadboard Jumper Wire
  • RS Stock No. 204-8242
  • Mfr. Part No. 4128
Subtotal (1 unit)
Kr. 16,37(exc. VAT)
In Stock
RS PRO Roll 500 mm(W)x 50 m(L)
  • RS Stock No. 356-2315
Subtotal (1 bag of 50 metres)
Kr. 582,92(exc. VAT)
In Stock
Fortex Tungsten Carbide PCB Drill Bit, 2 mm, 3.17mm Diameter
  • RS Stock No. 215-7000
  • Mfr. Part No. CBD3818/200
Subtotal (1 unit)
Kr. 49,31(exc. VAT)
In Stock
RS PRO Polyamide 66 17.8 mm 17.8 mm
  • RS Stock No. 304-149
Subtotal (1 bag of 50 units)
Kr. 193,95(exc. VAT)
In Stock
MikroElektronika MIKROE-511 150 mm Insulated Breadboard Jumper Wire in Black, Blue, Yellow, Red, Green, Brown, Grey,
  • RS Stock No. 791-6450
  • Mfr. Part No. MIKROE-511
Subtotal (1 unit)
Kr. 36,55(exc. VAT)
In Stock
Kitronik 4110 200 mm Jumper Wire Breadboard Jumper Wire
  • RS Stock No. 204-8239
  • Mfr. Part No. 4110
Subtotal (1 unit)
Kr. 16,37(exc. VAT)
In Stock
RS PRO Earthing Stud Kit Silver 10ft
  • RS Stock No. 218-639
Subtotal (1 unit)
Kr. 34,32(exc. VAT)
In Stock
RS PRO Foam 1000 mm(W)x 1 m(L)
  • RS Stock No. 815-3474
Subtotal (1 unit)
Kr. 800,59(exc. VAT)
In Stock
EUROSTAT 230 V Vacuum, For Electronic Equipment
  • RS Stock No. 265-8692
  • Mfr. Part No. 41-098-5012
Subtotal (1 unit)
Kr. 9 077,90(exc. VAT)
1
2
3
165
Results per page

Related links