Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 41 - 60 of 159 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 822-7751
Mfr. Part No.63819-0275
BrandMolex
kr 635,56
Each
Units
Locator T9999 - 63819
RS Stock No. 864-6954
Mfr. Part No.1673611-1
kr 14 425,39
Each
Units
Tool Holder CERTI-CRIMP - -
RS Stock No. 864-7095
Mfr. Part No.1490746-1
kr 20 415,13
Each
Units
Crimping Head - - -
RS Stock No. 865-8385
Mfr. Part No.09990000507
BrandHARTING
kr 1 793,80
Each
Units
Positioner - - -
RS Stock No. 864-7089
Mfr. Part No.456424-5
kr 1 726,21
Each
Units
F Crimper HDM - -
RS Stock No. 179-2469
Mfr. Part No.18.3805
kr 1 034,69
Each
Units
Locator MES-CZ-CT1,5 - -
RS Stock No. 876-2065
Mfr. Part No.300389
kr 102,29
Each
Units
Pin CERTI-CRIMP - -
RS Stock No. 876-2056
Mfr. Part No.169403
kr 278,76
Each
Units
Locator AMP - -
RS Stock No. 876-2080
Mfr. Part No.4-539785-7
kr 550,04
Each
Units
Locator Mini CERTI-LOK - -
RS Stock No. 515-1096
Mfr. Part No.M22520/2-09
BrandGlenair
kr 2 360,80
Each
Units
Positioner M22520/2-09 - -
RS Stock No. 827-3679
Mfr. Part No.3443-82-16
Brand3M
kr 3 052,22
Each
Units
Locator 451 16 3443
RS Stock No. 885-9614
Mfr. Part No.127-0000-905
kr 124,43
Each
Units
Shroud Centering Tool - - -
RS Stock No. 876-2046
Mfr. Part No.303848-2
kr 487,23
Each
Units
Pin - - -
RS Stock No. 864-3406
Mfr. Part No.308031-3
kr 5 487,69
Each
Units
Anvil - - -
RS Stock No. 174-3165
Mfr. Part No.724919-4
kr 2 118,33
Each
Units
Floating Shear - - -
RS Stock No. 803-4376
Mfr. Part No.1205668
kr 165,09
Each
Units
Locator CF 3000 LOC 1.5 - -
RS Stock No. 173-9640
Mfr. Part No.63811-7975
BrandMolex
kr 323,58
Each
Units
Locator 207128 - 63811
RS Stock No. 865-8398
Mfr. Part No.09990000630
BrandHARTING
kr 410,56
Each
Units
Positioner - - -
RS Stock No. 827-3666
Mfr. Part No.3443-82-06
Brand3M
kr 3 052,22
Each
Units
Locator 451 6 3443
RS Stock No. 876-2245
Mfr. Part No.525442-8
kr 1 954,32
Each
Units
Plug Gauge - - -
Related Products
RATCHET SPRING FOR RIGIDUS TOOL. ...
Description:
RATCHET SPRING FOR RIGIDUS TOOL.
Place the tool into the cavity from front ...
Description:
Place the tool into the cavity from front face of the insulator Push on the handle. Remove the contact by pulling on it.
The crimp tool now has a rotating locator ...
Description:
The crimp tool now has a rotating locator as part of the tool to cover use with Han D, DD, E and HD range of crimps. The locators (not illustrated) are for use with the previous version of this tool ...
Support crimp tools and positioners (not illustrated), are ...
Description:
Support crimp tools and positioners (not illustrated), are available and can be selected from the table according to contact current rating.