Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 61 - 80 of 159 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 876-2034
Mfr. Part No.1579005-1
kr 134,60
Each
Units
Spring ERGOCRIMP - -
RS Stock No. 876-2359
Mfr. Part No.525441-4
kr 3 426,09
Each
Units
Plug Gauge - - -
RS Stock No. 822-7632
Mfr. Part No.63800-0143
BrandMolex
kr 390,924
Each (In a Pack of 5)
Units
Cam Follower Pin T9999 - 63800
RS Stock No. 174-3155
Mfr. Part No.238018-7
kr 1 187,39
Each
Units
Insulation Crimper - - -
RS Stock No. 864-6881
Mfr. Part No.690472-2
kr 401,29
Each
Units
Stripper - - -
RS Stock No. 173-9638
Mfr. Part No.63819-1375
BrandMolex
kr 556,72
Each
Units
Locator 207128 - 63819
RS Stock No. 174-3156
Mfr. Part No.5-456406-6
kr 1 375,46
Each
Units
Wire Crimper - - -
RS Stock No. 760-0183
Mfr. Part No.DCE.91.070.5MVC
BrandLemo
kr 1 141,59
Each
Units
Positioner M - -
RS Stock No. 674-1707
Mfr. Part No.809-005
BrandGlenair
kr 1 945,84
Each
Units
Positioner - - -
RS Stock No. 713-4422
Mfr. Part No.09990000525
BrandHARTING
kr 1 875,72
Each
Units
Positioner Har-Speed - -
RS Stock No. 876-2030
Mfr. Part No.169406
kr 94,12
Each
Units
Stabilizer CERTI-LOK - -
RS Stock No. 173-9645
Mfr. Part No.63810-0104
BrandMolex
kr 82,35
Each
Units
Spring 207129 - 63810
RS Stock No. 864-3557
Mfr. Part No.58422-1
kr 177 575,47
Each
Units
Crimping Head DYNA-CRIMP - 58422
RS Stock No. 174-3159
Mfr. Part No.5-752977-9
kr 3 059,00
Each
Units
Anvil - - -
RS Stock No. 864-7146
Mfr. Part No.122562-1
kr 6 471,73
Each
Units
Seating Tool Z-PACK - -
RS Stock No. 175-6026
Mfr. Part No.JBX1OUTLP13
BrandSouriau
kr 3 597,30
Each
Units
Locator JBX - -
RS Stock No. 114-7920
Mfr. Part No.09990000112
BrandHARTING
kr 119,34
Each
Units
Locator Han-Com - -
RS Stock No. 864-7026
Mfr. Part No.1673672-1
kr 54 394,40
Each
Units
Crimping Head - - -
RS Stock No. 827-3669
Mfr. Part No.3443-82-08
Brand3M
kr 3 052,22
Each
Units
Locator 451 8 3443
RS Stock No. 343-2826
Mfr. Part No.TH592
BrandGlenair
kr 2 405,46
Each
Units
Turret AF8 - -
Related Products
RATCHET SPRING FOR RIGIDUS TOOL. ...
Description:
RATCHET SPRING FOR RIGIDUS TOOL.
Place the tool into the cavity from front ...
Description:
Place the tool into the cavity from front face of the insulator Push on the handle. Remove the contact by pulling on it.
The crimp tool now has a rotating locator ...
Description:
The crimp tool now has a rotating locator as part of the tool to cover use with Han D, DD, E and HD range of crimps. The locators (not illustrated) are for use with the previous version of this tool ...
Support crimp tools and positioners (not illustrated), are ...
Description:
Support crimp tools and positioners (not illustrated), are available and can be selected from the table according to contact current rating.