Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 141 - 159 of 159 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 864-7095
Mfr. Part No.1490746-1
kr 20 415,13
Each
Units
Crimping Head - - -
RS Stock No. 864-7067
Mfr. Part No.1-690496-5
kr 2 233,98
Each
Units
Shear Plate - - -
RS Stock No. 822-7758
Mfr. Part No.63819-0075
BrandMolex
kr 542,87
Each
Units
Locator T9999 - 63819
RS Stock No. 760-0183
Mfr. Part No.DCE.91.070.5MVC
BrandLemo
kr 1 141,59
Each
Units
Positioner M - -
RS Stock No. 864-7058
Mfr. Part No.690474-6
kr 1 343,56
Each
Units
Shear Blade - - -
RS Stock No. 864-6954
Mfr. Part No.1673611-1
kr 14 425,39
Each
Units
Tool Holder CERTI-CRIMP - -
RS Stock No. 760-0180
Mfr. Part No.DCE.91.070.3MVM
BrandLemo
kr 960,90
Each
Units
Positioner M - -
RS Stock No. 173-9639
Mfr. Part No.63819-1575
BrandMolex
kr 485,64
Each
Units
Locator 207128 - 63819
RS Stock No. 885-9611
Mfr. Part No.127-0000-907
kr 124,43
Each
Units
Shroud Centering Tool - - -
RS Stock No. 864-7076
Mfr. Part No.2-456135-4
kr 1 362,90
Each
Units
O Crimper - - -
RS Stock No. 827-3679
Mfr. Part No.3443-82-16
Brand3M
kr 3 052,22
Each
Units
Locator 451 16 3443
RS Stock No. 174-3158
Mfr. Part No.690459-1
kr 1 352,23
Each
Units
Shear Holder - - -
RS Stock No. 885-9608
Mfr. Part No.127-0000-902
kr 124,43
Each
Units
Positioner - - -
RS Stock No. 174-3151
Mfr. Part No.5-22280-0
kr 18,44
Each
Units
Spring - - -
RS Stock No. 876-2245
Mfr. Part No.525442-8
kr 1 954,32
Each
Units
Plug Gauge - - -
RS Stock No. 721-1443
Mfr. Part No.1208474
kr 684,63
Each
Units
Assembly Tool SACC BIT M8-D12 - -
RS Stock No. 2508326619
Mfr. Part No.TA-0000-502
BrandAmphenol
kr 4 409,40
Each
Units
- - - -
RS Stock No. 2509237813
Mfr. Part No.601966-5
kr 1 319,76
Each
Units
- - - -
RS Stock No. 2509497517
Mfr. Part No.WT111M
kr 555,00
Each
Units
- - - -
Related Products
RATCHET SPRING FOR RIGIDUS TOOL. ...
Description:
RATCHET SPRING FOR RIGIDUS TOOL.
Place the tool into the cavity from front ...
Description:
Place the tool into the cavity from front face of the insulator Push on the handle. Remove the contact by pulling on it.
The crimp tool now has a rotating locator ...
Description:
The crimp tool now has a rotating locator as part of the tool to cover use with Han D, DD, E and HD range of crimps. The locators (not illustrated) are for use with the previous version of this tool ...
Support crimp tools and positioners (not illustrated), are ...
Description:
Support crimp tools and positioners (not illustrated), are available and can be selected from the table according to contact current rating.